Traveling I-75 North:
I-75 to Exit 29 (State Route 63). Turn right off of the exit ramp. Take State Route 63 into Lebanon (approximately 8 miles). Once into Lebanon, street name will change to Main Street. DO NOT TURN OFF OF MAIN STREET. You will go through seven traffic lights. Immediately after the sixth traffic light, there will be an entrance ramp for State Route 48 South on the right. There will be a BP Station on your right before the entrance ramp. Take this and drive approximately 3 miles. At the 3rd traffic light, take a right onto Fujitec Drive. Ghent is approximately 1/10th of a mile down on the right on the corner of Fujitec & Henkle Drives.

Traveling I-75 South:
I-75 to Exit 29 (State Route 63). Turn left off of the exit ramp. Take State Route 63 into Lebanon (approximately 8 miles). Once into Lebanon, street name will change to Main Street. DO NOT TURN OFF OF MAIN STREET. You will go through seven traffic lights. Immediately after the sixth traffic light, there will be an entrance ramp for State Route 48 South on the right. There will be a BP Station on your right before the entrance ramp. Take this and drive approximately 3 miles. At the 3rd traffic light, take a right onto Fujitec Drive. Ghent is approximately 1/10th of a mile down on the right on the corner of Fujitec & Henkle Drives.

Traveling I-71 North:
Take I-71 to Exit 28 (Lebanon/South Lebanon on the highway sign/marker). Take a right off of the exit ramp. This is State Route 48. Get in the lefthand lane. Make a left at the traffic light. This is Fujitec Drive. Ghent is approximately 1/10th of a mile down on the right, on the corner of Fujitec & Henkle.

Traveling I-71 South:
Take I-71 to Exit 28 (Lebanon/South Lebanon on the highway sign/marker). Take a left off of the exit ramp. This is State Route 48. Get in the lefthand lane. Make a left at the traffic light. This is Fujitec Drive. Ghent is approximately 1/10th of a mile down on the right, on the corner of Fujitec & Henkle.

DIRECTIONS TO GHENT MANUFACTURING FOR TRUCK DRIVERS

DIRECTIONS FROM I-75 NORTH OR SOUTH DUE TO CONSTRUCTION IN DOWNTOWN LEBANON

FROM CINCINNATI – SOUTH OF I-275 – TAKE I-71N
NORTH OF I-275
I-75 to Exit 29 (State Route 63). Turn right off of the exit ramp. Take State Route 63 and make a right onto State Route 741 to I-71N. Take I-71N to Exit 28 (Lebanon/South Lebanon on the highway sign/marker). Take a right off of the exit ramp. This is State Route 48. Get in the lefthand lane. Make a left at the traffic light. This is Fujitec Drive. Ghent is approximately a 1/10th of a mile down on the right, on the corner of Fujitec & Henkle.

FROM DAYTON – I-75 S
I-75S to Exit 29 (St. Rt. 63). Turn left off of the exit ramp. Take St. Rt. 63 and make a right onto St. Rt. 741 to I-71N. Take I-71N to Exit 28 (Lebanon/South Lebanon on the highway sign/marker). Take a right off of the exit ramp. This is St. Rt. 48. Get in the lefthand lane. Make a left at the traffic light onto Fujitec Drive. Ghent is approximately _ mile down on the right, on the corner of Fujitec & Henkle.

Directions to get back to I-75N
Take I-71S to Kings Mill Exit (exit 25). Turn right off of the exit ramp. Take a right onto St. Rt. 741 and then, a left onto St. Rt. 63. Make a right to get onto I-75 N.

Traveling I-71 North:
Take I-71 to Exit 28 (Lebanon/South Lebanon on the highway sign/marker). Take a right off of the exit ramp. This is State Route 48. Get in the lefthand lane. Make a left at the traffic light. This is Fujitec Drive. Ghent is approximately 1/10th of a mile down on the right, on the corner of Fujitec & Henkle.

Traveling I-71 South:
Take I-71 to Exit 28 (Lebanon/South Lebanon on the highway sign/marker). Take a left off of the exit ramp. This is State Route 48. Get in the lefthand lane. Make a left at the traffic light. This is Fujitec Drive. Ghent is approximately 1/10th of a mile down on the right, on the corner of Fujitec & Henkle.